行業資訊

壓路機啟動馬達的維護要點

來源：http://m.lehuoaijia.com/ 日期：2022-12-30

如果說發動機是壓路機的心臟，那么液壓馬達就是它的肌肉組織，液壓馬達是整個液壓系統的核心，所以要想使液壓系統能保持良好的運轉，做好液壓馬達的維護是非常必要的。下面濟南壓路機出租廠家為您解答。

If the engine is the heart of the roller, the hydraulic motor is its muscle tissue, and the hydraulic motor is the core of the entire hydraulic system. Therefore, it is necessary to maintain the hydraulic motor in order to keep the hydraulic system running well. Next, Jinan roller rental manufacturer will answer for you.

1、保持導線接觸良好，消除接觸處積污和氧化物，連接后接觸處涂少許凡士林防銹蝕；

1. Keep the wire in good contact, eliminate the dirt and oxide at the contact, and apply a little Vaseline at the contact after connection for rust prevention;

2、為保護蓄電池，每次起動不超過5S，兩次起動應間隔2分鐘，三次起動不著須排除故障后再起動；

2. In order to protect the battery, each start shall not exceed 5s, and the interval between two starts shall be 2 minutes. If it is not possible to start three times, it shall be started after troubleshooting;

3、起動時踩下離合器踏板，將變速器掛空擋；

3. When starting, step down the clutch pedal and shift the transmission to neutral;
濟南壓路機出租

4、發動機著火后，要立即松開起動開關，以減少電動機空轉和單向離合器磨損。

4. After the engine is on fire, release the start switch immediately to reduce motor idling and one-way clutch wear.

5、保持液壓馬達表面溫度處于穩定，當連續運轉一段時間后表面溫度勢必會升高，為避免馬達殼體在連續運轉中的高溫導致的摩擦使磨損間隙過大，造成內泄量大，殼體內的壓力加大后，泄漏到殼外，從而引起容積效率的降低，須對其進行冷卻沖洗。

5. Keep the surface temperature of the hydraulic motor stable. The surface temperature is bound to rise after continuous operation for a period of time. In order to avoid excessive wear clearance caused by friction of the motor housing due to high temperature during continuous operation, resulting in large internal leakage, the pressure inside the housing increases, and then leaks out of the housing, causing a reduction in volumetric efficiency, it must be cooled and flushed.

此外注意如果出現故障比較嚴重，要進行檢修或者置換，不能將就使用，避免造成更大的損害。

In addition, if the fault is serious, maintenance or replacement shall be carried out, and it shall not be used to avoid greater damage.

操作人員要經過專門的培訓，對設備的構造、性能有足夠的了解，并且熟練的操作壓路機生產廠家供給的產品使用保護解釋書，是操作者操作裝備的必備材料，在操作機器前，必定要先瀏覽使用保護闡明書，按闡明書的請求進行操作、保養。關注我們http://m.lehuoaijia.com，了解更多事項！

The operators shall receive special training, have a sufficient understanding of the structure and performance of the equipment, and operate the product use protection explanation provided by the roller manufacturer skillfully. It is a necessary material for the operators to operate the equipment. Before operating the machine, they must first browse the use protection explanation, and operate and maintain according to the requirements of the explanation. Follow us http://m.lehuoaijia.com , learn more!

上一條：什么情況下租用壓路機更劃算呢？

下一條：水泥穩定碎石怎么取不出完整的芯樣？